Infill slab method is effective to protect against termites for long
Termites are difficult to get rid of, they are not as easy as most of us might have thought. Thus, it is important to take care of them at the very starting when the building is being constructed. This is a much easier solution to prevent any termite infestation in the future. One of the best ways to achieve this is through the method of infill slab. The process of infill slab includes:
Forming the footing, that is the structure of the slab
Next, preparing the infill slab
Prepping up for protection from termite ingress
Lastly, pour the slab at the desired position
The process of the whole termite treatment may sound a bit puzzling. A simple explanation of all the infill slab detail are:
Structure of the slab
A footing is to be laid down initially and for that, a trench is dug and later filled with reinforced concrete. The steel bars are kept vertical to the ground for keeping the building strong and upward. The footing is basically the outline of the new building or home. Mansory blocks are then topped on these footings to which the concrete is poured.
Termite infill slab
If the concrete is to be poured into the whole structure, the cost would increase drastically reaching thousands. Usually, by this stage, the sewers and drainage pipes are installed. Next, the slab infill and other reinforcements are formed in the raft. The pest controllers then carefully slip the termite proof collars between and below the finished slab level of the sewer and drain pipes without damaging them.
Protection from termite ingress
Chemical reticulation systems networks are installed under the slabs that can be recharged or re-filled in the future duration of time. The perimeters and the cold joints are also protected with effective anti-termite chemicals and foam solutions that the professional pest controllers use.
Pouring the slabs in position
Once the managers and the pest controllers successfully protect the perimeters of the structure, the slabs are then poured. Well, the only conjunction of protection against the termites is the plastic collars and foam that are installed.
The trusted and renowned pest or termite controllers use the latest GREENZONE termite and insect barriers during the construction phase. The GREENZONE barriers are integrated within a foam that is installed in the gaps of the slabs providing long-lasting protection from termites. This termite barrier is installed around penetrations in concrete slabs and also within the construction joints. This technology not only protects the home and premises from termites but also from black ants and cockroaches. Protect your premises with pre-construction anti-termite infill slab treatment.
#Pest Controller #Termite Treatment Prices #Pest Control Prices #Termite Treatment #Infill Slab #Termite Barrier #Termite and Pest Control #Termite Control #Termidor #Pre-Purchase Pest Inspections